Friend mo po ba si Albie Casino 78
From GunGame5 Documentation
Always solder in any well-ventilated region.
Epiphone is a subsidiary of the Gibson guitar business. Epiphone specializes in making affordable models of extra dear Gibson guitars, but they also produce numerous original instruments. The Casino yous Epiphone's version of the Gibson ES-330 guitar. It is a hollow-body, thinline electrical guitar. Notable musicians including Paul McCartney, John Lennon plus Noel Gallagher maintain performed live using this guitar. One unmodified Casino comes with 2 Gibson P-90 pickups. The pickup configuration plus wiring are quite similar to the Gibson ES-330. Both need a quantity also tone dial for each pickup, seeing that well as some 3-way pickup selector switch.
Difficulty: Moderately Challenging
Directions
Things You'll Need
Screwdriver Soldering iron Shaving brush Spare wire Replacement guitar strings
1 Get a wiring diagram for your guitar. Whether you're replacing or upgrading your pickups, it's necessary to follow the wiring diagram. The Casino has the identical wiring layout as the Gibson ES-330. If you can't find the diagram to the Casino, follow the diagram for a similar, hollow-body guitar for a pair about P-90 pickups, such as the Gibson ES-335.
2 Specify up any workspace. You need sufficient area to lay the guitar down flat, because well as some power provide for your soldering iron.
3 Remove the strings and unscrew the pickups. If your guitar has a pick guard, unscrew that too. In order to acquire the pickups out regarding the cavity to admittance the wiring, you need to carry the strings off. Remove the Epiphone Casino's pair of P-90 pickups with loosening the single screw on each side regarding the chrome pickup housing. Gently pull the pickup toward you once unscrewed hence you can access the back of it.
4 Melt the wire connection together with your soldering iron plus place the pickups to one part. With the pickup disconnected, you may now access half of the wiring.
5 Remove the knobs to access the remaining portion of the wiring. Since it is a hollow-body guitar, you entry the wiring via the front, rather besides by removing the back panels as you would on a sturdy-body guitar. Gently lift the dial out of the potentiometer shaft, next unscrew the shaft to access the wiring. You immediately experience access to all of the wiring.
8 Screw your pickups back in location and replace the volume dials. Put on any new set regarding strings and check the guitar.
Tips & Warnings
Remove solder dirt with any shaving brush. If your dials are mulish, don't yank it; this can damage the potentiometers.
References
Epiphone: Casino Gibson: Schematics Gibson: Schematics: Gibson ES335-ES175
Deaf-Eddie: My "Lennon Casino" Venture
Still Credit Arthur S. Aubry/Stockbyte/Getty Images ;
Read Next:
