Art and listening to Florence the Machine is 2

From GunGame5 Documentation

Jump to: navigation, search


Sergers are sewing machines known for their impeccable ability to avoid fabric out of fraying while sewing. Following long periods about frequent use, your serger's drive belt might become loose or break completely. The drive belt attaches directly to the serger's car, so if the belt yous stretched or damaged, your serger will not work properly. Replacing the drive belt entails partially dismantling the UltraLock serger machine.

Related Searches:

Directions

Things You'll Require

Flat-head screwdriver Compressed air may Cotton swab Rubbing alcohol Sewing machine oil

Recommend Edits

1 Unplug the serger and let it cool down for a few minutes.

2 Pry off the main cover by means of some flat-head screwdriver. This will unearth the mechanical elements within the lower section about the serger, since nicely as the belt pulley on the back part about the machine.

3 Make use of any may of condensed air to blow out all dust, broken thread and other types of waste away from inside the serger around the motor. Apply some rubbing alcohol to any cotton swab and wipe down any extra debris from inside the serger. Be like thorough since possible. Even the smallest amount regarding waste can lead to substantial problems with the motor if left unattended.

4 Apply some generous quantity regarding sewing machine oil to any clean wash cloth. Rub the oil all over the mechanical parts inside the machine. Also, utilize a few drops about oil to the car's bearings.

6 Wrap the replacement belt all over the pulley. Loosen the flat or Phillips-head screw on the drive pulley. This allows you to adjust the pulley by sliding it back also forth. Pull awake on the motor pulley until the belt sits taut on the drive. Tighten the pulley screw to safe the belt in place.

7 Place the primary protect back onto the serger and snap it into place to conceal the motor.

Suggestions & Warnings

If cleaning and lubricating the motor plus replacing the belt does never fix the problem, that could be any symptom of a larger electrical or mechanical problem. Refer these mends to a professional sewing machine fix person.

Advocate item

References

Best Sewing Machine: Singer UltraLock Serger Critique CR How To: Singer Serger

Personal tools