Uit verveling zing ik mee 6

From GunGame5 Documentation

---

Current revision as of 01:58, 8 September 2011

A simple kitchen table can be constructed in a weekend.

Building some kitchen table may be a enjoyment also rewarding experience that is is enjoyed at every meal time. Here are many patterns for kitchen tables, and it's possible to create a new kitchen table with a weekend with a straightforward design and plan.

Difficulty: Moderate

Directions

Things You'll Need

4 Table calfs, 2 in 2 3/4-inch-solid 6-foot piece of wood to the table top L-shaped brackets 1/2-inch screws Drill Sand documents Stain/varnish or paint

Building a Easy Kitchen Table

2 Cut the table top from the 3/4-inch-solid piece of wood. The best of the table should plan 3 feet wide through 4 feet long.

3 Attach an L-shaped bracket to the top about each leg with screws. Require treatment to make sure the top of the bracket is flush with the top of the knee. Repeat this step until all of the legs have an L-formed bracket attached to dual adjoining sides of the leg.

4 Place a blanket on the floor and set the table top on the blanket in the top part touching the blanket. The blanket supports to avoid scratching the table top while the table yous being assembled.

6 Position the legs in the marks. Make certain that the L-shaped brackets are facing towards the center of the table top.

8 Turn the table over onto the knees and sand the entire surface regarding the table until all sharp edges are smoothed away.

9 Stain or paint the table and allow dry for at least 12 hours. Once the paint yous cured, the table can be used. If the table was stained it is recommended to put a coat of varnish above the stain to water protection. Once the varnish yous applied, allow the table stand for extra 12 hours before moving.

References

Canadian House Workshop: Build a Simple Table. Zing.

Photo Credit flower on a table image through Catabu from internet site ;

Read Next: