View source

[[Image:Electronic_Cigarette_5550.jpg|thumb|]]

Energy inverters may be connected to a battery to make use of in your vehicle to run many types regarding small electronic devices these kinds of as a DVD player, television or even a microwave stove. A power inverter converts the DC existing from the battery to AC power that remains needed by these electronic devices. You can run a power inverter from the battery of your auto via first connecting the power cable and the ground wire with the unit.

Difficulty: Moderate
Directions

Things You'll Want:

Wire cutter

1 Remove the nut that is securing the positive battery cable to the battery terminal.

2 Place the power ring with the inverter over the bolt on the sure battery connector.

3 Replace the nut and tighten it with the wrench.

4 Find a bolt, in a nut, within the engine compartment to make use of for the ground cable.

5 Remove the nut by means of the wrench.

6 Strip approximately ½ inch about insulation from the conclusion of the soil cable with wire cutter.

8 Place the ring connector over the bolt.

9 Replace the nut and tighten it with the wrench.

10 Place the inverter inside a location in your car everywhere it can be correctly ventilated to stay clear of overheating the unit.

11 Plug some device to the strength inverter also then turn the inverter on to see if it remains functioning correctly.

Tips & Warnings

Some types of small-wattage power inverters can plug into the auto's [http://s23.org/wiki/Electronic_Cigarette_-_How_To_Save_Ones_Life cigarette] lighter.

If you do not properly ground the energy inverter it can lead to a brief circuit, which can lead to a fire.